P700 has now been replaced by our new WTW Alyza PO4 Analyzer.
The P 700 IQ orthophosphate analyzer is another component for the IQ Sensor Net (System 2020 XT). It can be integrated into new and existing systems just as easily as a sensor. The measuring principle is based on the photometric yellow method (molybdate vanadate), which has been a proven measuring method for orthophosphate. The wet chemical measurement directly during operation in makes it the optimal solution to support phosphate elimination as well as for monitoring the phosphate freight.
Basin edge mounting
The P 700 IQ can be operating outside directly on the edge of the process basin (onsite). Short transport distances and and timely measured values are therefore guaranteed. The meter is protected well against any weather thanks to its optional climate package.
Low reagent consumption
The P 700 IQ boasts an extremely low use of reagents - an advantage that significantly reduces operating costs.
Large measuring range
Based on its large measuring range, the P 700 IQ can be used universally. Switching between measuring ranges is now possible at any time without any added costs.
Automatic calibration with standard
The optional switchable and fully automated calibration function with freely selectable intervals ensures an exceptional degree of operational safety.
|Measuring Range||A: 0.05 ... 15.00 mg/l PO4-P|
|B: 1 ... 50 mg/l PO 4-P|
|Resolution||A: 0.05 mg/l PO 4-P|
|B: 1 mg/l PO 4 -P|
|Accuracy||A: ± 2%, ± 0.05 mg/l|
|B: ± 2%, ± 1 mg/l|
|Response time t90||< 5 min|
|Detection limit||A: 0.05 mg/l PO4-P|
|B: 1 mg/l PO 4 -P|
|Calibration||Manual or automatic (adjustable)|
|pH range||5 ... 9|
|Sample temperature||+ 4 ... + 45 °C|
|Measuring interval||< 5 min (adjustable)|
|Operating temperature||– 20 ... + 40 °C|
|Storage temperature||– 20 ... + 50 °C|
|Reagent consumption||2500 ml for 8 months with measuring range (A) and 10 min measuring interval|
|2500 ml for 4 months with measuring range (B) and 10 min measuring interval|
|Cleaning solution||1000 ml for 4 months with cleaning every 24h|
|Equipment safety||EN 61010-1; UL 3111-1; CAN/CSA C22.2 No. 1010.1|
|Protection class||IP 54|
|Climate control||Heating, cooling (fan)|
|Power supply||115 / 230 VAC|
|Weight||~ 30 kg (without reagents)|
|Dimensions||~ 678 x 780 x 395 mm (~ 26.69 x 30.71 x 15.55 in.)|
|Outputs||Relays, analog outputs, interfaces via IQ Sensor Net-components|